Code: W-3625 M Topmodel
Wall safe with key lock, height 262 x width 352 x depth 250 mm, 1x shelf, color anthracite RAL 7016. full description and parameters
Wall safe with key lock, height 262 x width 352 x depth 250 mm, 1x shelf, color anthracite RAL 7016.
| Height: | 262 mm |
|---|---|
| Width: | 352 mm |
| Depth: | 250 mm |
| Mass: | 11 kg |
| Volume: | 16 l |
| Number of shelves: | 1 |
| Locking method: | to the safe key |
| Type of safe: | safe in the wall |
| Warranty (years): | 2 |
| Manufacturer: |
|
Code: WE-3625 ME
Wall safe WE-3625 ME221.21 Eur without VAT
(267.66 Eur with VAT)
Luxury wall safe with key lock and electronic code, height 262 x width 352 x depth 250 mm, internal LED lighting. 1x shelf, color anthracite RAL 7016.
Code: WE-3618 ME
Wall safe WE-3618 ME188.26 Eur without VAT
(227.79 Eur with VAT)
Luxury wall safe with key lock and electronic code, height 262 x width 352 x depth 180 mm, internal LED lighting. This safe has a so-called gold backup safe key for emergency opening (only 1 pc). 1x shelf, color anthracite RAL 7016.
Code: WE-3730 ME
Wall safe WE-3730 ME300.31 Eur without VAT
(363.38 Eur with VAT)
Luxury wall safe with key lock and electronic code, height 372 x width 510 x depth 300 mm, internal LED lighting. 1x shelf, color anthracite RAL 7016.
Code: WE-6130 ME
Wall safe WE-6130 ME319.90 Eur without VAT
(387.08 Eur with VAT)
Luxury wall safe with key lock and electronic code, height 510 x width 372 x depth 300 mm, internal LED lighting. 2x shelves, color anthracite RAL 7016.
Code: W-3618 M Topmodel
Wall safe W-3618 M Topmodel157.33 Eur without VAT
(190.37 Eur with VAT)
Wall safe with key lock, height 262 x width 352 x depth 180 mm, 1x shelf, color anthracite RAL 7016.
One of the basic criteria for choosing a safe is always its security expressed by the safety class of the safe. In the Czech Republic, the inclusion of a safe in a security class is based on two standards, namely the Czech standard ČSN 916012 and the European standard EN 1143-1.
Standard EN 1143-1 regulates the safety of safes in those cases where higher requirements are placed on the safety of safes. According to this standard, seven safety classes are distinguished. The basic security level of safes is governed by the ČSN 916012 standard, which distinguishes a total of three levels of security.
Security classes of safes according to the EN 1143-1 standard:
There are a total of seven safety classes, designated 0 to VI. A label on the inside of the door, which is firmly attached, usually with rivets, informs the interested party about how the safes are classified in the relevant category. Certificates on the inclusion of the safe in the security class are issued by certified laboratories that have gone through the certification process and have the appropriate knowledge and skills. The classification of safes is the same throughout the European Union. When classifying safes, testing laboratories carry out tests and forceful opening of the safe.
Used tools and time are taken into account for evaluating the safe. The rating of the safe is expressed as a resistance value expressed in RU (resistance units). The higher the number of RUs, the higher the resistance and protection of the safe against burglary.
Vaults are always classified according to the lowest measured resistance. Breaking the protection of the safe takes the form of either manual opening, then it is a so-called partial break-in, or breaking the door, i.e. a so-called full break-in. The test results are then converted to the RU value.
For a better orientation in the classification of security classes, we present indicative deposit amounts in CZK. In order to determine the relevant financial deposit amount, however, a consultation with the relevant insurance company is always necessary. In order to meet the safety requirements and classify the safe in a given class, it is necessary to observe the proper anchoring of the safe in the wall or in the floor or walling of wall safes, which is always indicated in the attached instructions.
Security class 0 for vaults:
Lowest number of locks: 1
Lowest required security lock class: A
Approximate storage amount: CZK 300,000
Resistance units: RU (30/30)
Safety class I for safes:
The lowest number of locks: 1
The lowest required security lock class: A
Approximate storage amount: CZK 500,000
Resistance units: RU (30/50)
Safety class II for safes:
Lowest Number of Locks: 1
Lowest Required Security Lock Class: A
Approximate storage amount: CZK 1,200,000
Resistance units: RU (50/80 )
Safety class III for safes:
The lowest number of locks: 1
The lowest required security lock class: B
Approximate storage amount: CZK 4,000,000
Resistance units: RU (80/120)
Safety class IV for safes:
The lowest number of locks: 2
The lowest required security lock class: B
Approximate storage amount: CZK 6,000,000
Resistance units: RU (120/180)
Safety class V for safes:
The lowest number of locks: 2
The lowest required security lock class: B
Approximate storage amount: CZK 16,000,000
Resistance units: RU (180/270)
Safety class VI for safes:
Minimum number of locks: 2
Indicative deposit amount: CZK 30,000,000
Security classes of safes according to the ČSN 916012 standard:
The safety of safes can be further assessed according to the ČSN 916012 standard, which is intended for the classification and testing of mobile safes with basic security according to their resistance to burglary, which are not addressed by the EN 1143-1 standard.
Safety class Z1 for safes:
Resistance units: RU (10/10)
Lowest number of locks: 1
Lowest lock class: A
Intended for, e.g.: storing a weapon, storing things for the time of your absence, etc. .
Safety class Z2 for safes:
Resistance units: RU (15/20)
Lowest number of locks: 1
Lowest lock class: A
Intended for e.g.: storing medicines, poisons, documents, weapons and cash in CZK 30,000
Safety class Z3 for safes:
Resistance units: RU (20/25)
Lowest number of locks: 1
Lowest lock class: A
Intended for, e.g.: storage of documents, medicines, poisons, up to 10 pieces of weapons and cash up to CZK 50,000
Security classes S1 and S2 for safes:
Safety classes "S" according to the EN 14450 standard are not actually safety classes of safes, but of safes, metal boxes and tin cabinets. The manufacturer of safes often has one of their products certified in this class so that they can offer clients a certified product, but there is not much to say about security. It is stated more or less only for the good feeling of the user that he has a certified product.
Miscellaneous instructions - locks, bolting and walling of safes:
